Revolutionary diving torch with exceptional features
patented charging method
Our team developed a special, patented charging method that does not require dismounting the body. Charger ports do not need to be secured and sealed as they are only active in charging mode while placed in their own docking station. Recharging is only possible if the charge level drops under 30 %. The protected electric system prevents the battery from overcharging and electric damage. You do not have to worry anymore about mounting and O rings, just plug the torch into the docking station and take it out before going diving!
Maintenance-free
The closed system with the alloy body and the acid-proof screws and the special glass makes our torch almost maintenance-free. Only the bronze charging points need occasional cleaning, due to the oxidation caused by the salt water.
Battery: 11.1V 7000mAh
LED: 12V 30W 900mA
Recharging is only allowed once the charge level drops to 30%.
Up to 50,000 operating hours when used as intended. LEDs and batteries we install have CE certification.
5 years of testing and developing
The final version has been tested more than 700 times in the last 5 years. As a result, we concluded that it was a reliable, easy to use and maintenance-free product. The battery health of our first test torch is still 93% after 5 years. Therefore, you do not need an extra battery pack.
During the design process
we focused on three main points
light quality
The used LED technology works at a special light temperature, it makes it possible to see the underworld just as in sunlight. The diffused light makes our diving torch a great choice for making underwater video and photography.
SECUre operation
The electronic system is protected many times over for long life and reliability. The design provides protection to it even under the toughest underwater conditions. No moving mechanical parts. The included power switch can be disconnected from a body to prevent an accidental power on.
charging method
The charging method does not require the torch to be disassembled. Charger ports do not need to be secured and sealed as they are only active in charging mode while plugged in to their own docking station.